EMC Directive Standards
Harmonized standards for the implementation of the Council Directive 89/336/EEC (2000/C 359/02).
CENELEC
EN 50065-1:2001-Signaling on low-voltage electrical installations in the frequency range 3 to 148.5 kHz-Part 1: General requirements, frequency bands, and electromagnetic disturbances; Amendment A1:1992 to EN 50065-1:1991; Amendment A2:1995 to EN 50065-1:1991; Amendment A3:1996 to EN 50065-1:1991.
EN 50081-1:1992-Electromagnetic compatibility-Generic emission standard-Part 1: Residential, commercial, and light industry.
EN 50081-2:1994-Electromagnetic compatibility-Generic emission standard-Part 2: Industrial environment.
EN 50082-1:1998-Electromagnetic compatibility-Generic immunity standard-Part 1: Residential, commercial, and light industry.
EN 50082-2:1995-Electromagnetic compatibility-Generic immunity standard-Part 2: Industrial environment.
EN 50083-2:2001-Cabled networks for television signals, sound signals, and interactive services-Part 2: Electromagnetic compatibility for equipment; Amendment A1:1997 to EN 50083-2:1995.
EN 50090-2-2:1997-Home and building electronic systems (HBES)-Part 2-2: System overview-General technical requirements.
EN 50091-2:1996-Uninterruptible power systems (UPS)-Part 2: EMC requirements.
EN 50130-4:1996-Alarm systems-Part 4: Electromagnetic compatibility-Product family standard: Immunity requirements for components of fire, intruder, and social alarm systems; Amendment A1:1998 to EN 50130-4:1995.
EN 50148:1996-Electronic taximeters.
EN 50199:1998-Electromagnetic compatibility (EMC)-Product standard for arc welding equipment.
EN 50227:1999-Control circuit devices and switching elements, proximity sensors, dc interface for proximity sensors and switching amplifiers (NAMUR).
EN 50263:2000-Electromagnetic compatibility (EMC)-Product standard for measuring relays and protection equipment.
EN 50270:1999-Electromagnetic compatibility-Electrical apparatus for the detection and measurement of combustible gases, toxic gases, or oxygen.
EN 55011:2000-Industrial, scientific, and medical (ISM) radio-frequency equipment-Radio disturbance characteristics-Limits and methods of measurement; Amendment A1:1999 to EN 55011:1998.
EN 55013:2001-Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment.
EN 55014-1:2001-Electromagnetic compatibility-Requirements for household appliances, electric tools, and similar apparatus-Part 1: Emission-Product family standard.
EN 55014-2:1997-Electromagnetic compatibility-Requirements for household appliances, electric tools, and similar apparatus-Part 2: Immunity-Product family standard.
EN 55015:2001-Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.
EN 55020:2002-Electromagnetic immunity of broadcast receivers and associated equipment.
EN 55022:1998-Information technology equipment-Radio disturbance characteristics-Limits and methods of measurement; Amendment A1:2000 to EN 55022:1998.
EN 55024:1998-Information technology equipment-Immunity characteristics-Limits and methods of measurement; Amendment A1:2001 to EN 55024:1998.
EN 55103-1:1997-Electromagnetic compatibility-Product family standard for audio, video, audiovisual, and entertainment lighting control apparatus for professional use-Part 1: Emission.
EN 55103-2:1997-Electromagnetic compatibility-Product family standard for audio, video, audiovisual, and entertainment lighting control apparatus for professional use-Part 2: Immunity.
EN 55104:1995-Electromagnetic compatibility-Immunity requirements for household appliances, tools, and similar apparatus-Product family standard.
EN 60204-31:1998-Safety of machinery-Electrical equipment of machines-Part 31: Particular safety and EMC requirements for sewing machines, units, and systems.
EN 60439-1:1999-Low-voltage switch gear and control gear assemblies-Part 1: Type-tested and partially type-tested assemblies.
EN 60521:1995-Class 0.5, 1, and 2 alternating-current watt-hour meters.
EN 60555-2:1987-Disturbances in supply systems caused by household appliances and similar electrical equipment-Part 2: Harmonics.
EN 60555-3:1987-Disturbances in supply systems caused by household appliances and similar electrical equipment-Part 3: Voltage fluctuations; Amendment A1:1991 to EN 60555-3:1987.
EN 60669-2-1:2000-Switches for household and similar fixed electrical installations-Part 2: Particular requirements-Section 1: Electronic switches; Amendment A11:1997 to EN 60669-2-1:1996.
EN 60669-2-2:1998-Switches for household and similar fixed electrical installations-Part 2: Particular requirements-Section 2: Electromagnetic remote-control switches (RCS).
EN 60669-2-3:1999-Switches for household and similar fixed electrical installations-Part 2-3: Particular requirements-Time-delay switches (TDS).
EN 60687:1993-Alternating current static watt-hour meters for active energy (classes 0.2 S and 0.5 S).
EN 60730-1:2001-Automatic electrical controls for household and similar use-Part 1: General requirements; Amendment A11:1996 to EN 60730-1:1995; Amendment A17:2000 to EN 60730-1:1995.
EN 60730-2-11:1994-Automatic electrical controls for household and similar use-Part 2-11: Particular requirements for energy regulators; Amendment A1:1997 to EN 60730-2-11:1993.
EN 60730-2-13:1998-Automatic electrical controls for household and similar use-Part 2-13: Particular requirements for humidity sensing controls.
EN 60730-2-14:1998-Automatic electrical controls for household and similar use-Part 2-14: Particular requirements for electric actuators.
EN 60730-2-18:1999-Automatic electrical controls for household and similar use-Part 2-18: Particular requirements for automatic electrical water and air-flow sensing controls, including mechanical requirements.
EN 60870-2-1:1996-Telecontrol equipment and systems-Part 2: Operating conditions-Section 1: Power supply and electromagnetic compatibility.
EN 60945:2002-Maritime navigation and radiocommunication equipment and systems-General requirements-Methods of testing and required test results.
EN 60947-1:1999-Low-voltage switch gear and control gear-Part 1: General rules.
EN 60947-2:1996-Low-voltage switch gear and control gear-Part 2: Circuit breakers; Amendment A1:1997 to EN 60947-2:1996.
EN 60947-3:1999-Low-voltage switch gear and control gear-Part 3: Switches, disconnectors, switch-disconnectors, and fuse-combination units.
EN 60947-4-1:2001-Low-voltage switch gear and control gear-Part 4-1: Contactors and motor starters-Electromechanical contactors and motor starters; Amendment A2:1997 to EN 60947-4-1:1992.
EN 60947-4-2:2000-Low-voltage switch gear and control gear-Part 4-2: Contactors and motor starters-Ac semiconductor motor controllers and starters.
EN 60947-4-3:2000-Low-voltage switch gear and control gear-Part 4-3: Contactors and motor starters-Ac semiconductor controllers and contactors for nonmotor loads.
EN 60947-5-1:1998-Low-voltage switch gear and control gear-Part 5-1: Control circuit devices and switching elements-Electromechanical control circuit devices; Amendment A12 to EN 60947-5-1:1997.
EN 60947-5-2:1999-Low-voltage switch gear and control gear-Part 5-2: Control circuit devices and switching elements-Proximity switches.
EN 60947-5-3:1999-Low-voltage switch gear and control gear-Part 5-3: Control circuit devices and switching elements-Requirements for proximity devices with defined behavior under fault conditions (PDF).
EN 60947-5-6:2001-Low-voltage switch gear and control gear-Part 5-6: Control circuit devices and switching elements-Dc interface for proximity sensors and switching amplifiers (NAMUR).
EN 60947-6-1:1992-Low-voltage switch gear and control gear-Part 6-1: Multiple-function equipment-Automatic transfer switching equipment; Amendment A2:1997 to EN 60947-6-1:1991.
EN 60947-6-2:1993-Low-voltage switch gear and control gear-Part 6-2: Multiple-function equipment-Control and protective switching devices (or equipment) (CPS); Amendment A1:1997 to EN 60947-6-2:1993.
EN 61000-3-2:2001-Electromagnetic compatibility (EMC)-Part 3-2: Limits-Limits for harmonic current emissions (equipment input current up to and including 16 A per phase).
EN 61000-3-3:1995-Electromagnetic compatibility (EMC)-Part 3-3: Limits-Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current less than or equal to 16 A per phase and not subject to conditional connection; Amendment A1:2001 to EN 61000-3-3:1995.
EN 61000-3-11:2000-Electromagnetic compatibility (EMC)-Part 3-11: Limits-Limitation of voltage changes, voltage fluctuations, and flicker in public low-voltage supply systems-Equipment with rated current less than or equal to 75 A and subject to conditional connection.
EN 61000-6-1:2001-Electromagnetic compatibility (EMC)-Part 6-1: Generic standards-Immunity for residential, commercial, and light-industrial environments.
EN 61000-6-2:2001-Electromagnetic compatibility (EMC)-Part 6-2: Generic standards-Immunity for industrial environments.
EN 61000-6-3:2001-Electromagnetic compatibility (EMC)-Part 6-3: Generic standards-Emission standard for residential, commercial, and light-industrial environments.
EN 61000-6-4:2001-Electromagnetic compatibility (EMC)-Part 6-4: Generic standards-Emission standard for industrial environments.
EN 61008-1:1995-Electrical accessories-Residual current-operated circuit breakers (RCCBs) without integral overcurrent protection for household and similar uses-Part 1: General rules.
EN 61009-1:1995-Electrical accessories-Residual current-operated circuit breakers (RCCBs) with integral overcurrent protection for household and similar uses-Part 1: General rules.
EN 61036:1997-Alternating current static watt-hour meters for active energy (classes 1 and 2); Amendment A1:2000 to EN 61036:1996.
EN 61037:1992-Electricity metering-Tariff and load control-Particular requirements for electronic ripple control receivers; Amendment A1:1996 to EN 61037:1992; Amendment A2:1998 to EN 61037:1992.
EN 61038:1993-Electricity metering-Tariff and load control-Particular requirements for time switches; Amendment A2:1998 to EN 61038:1992.
EN 61131-2:2000-Programmable controllers-Part 2: Equipment requirements and tests.
EN 61204-3:2001-Low-voltage power supplies, dc output-Part 3: Electromagnetic compatibility (EMC).
EN 61268:1996-Alternating current static var-hour meters for reactive energy (classes 2 and 3).
EN 61326:1998-Electrical equipment for measurement, control, and laboratory use-EMC requirements.
EN 61543:1996-Residual current-operated protective devices (RCDs) for household and similar use-Electromagnetic compatibility.
EN 61547:1996-Equipment for general lighting purposes-EMC immunity requirements.
EN 61800-3:1997-Adjustable speed electrical power drive systems-Part 3: EMC product standard including specific test methods.
EN 61812-1:1996-Specified time relays for industrial use-Part 1: Requirements and tests.
CEN
EN 12015:1998-Electromagnetic compatibility-Product family standard for lifts, escalators, and passenger conveyors-Emission.
EN 12016:1998-Electromagnetic compatibility-Product family standard for lifts, escalators, and passenger conveyors-Immunity.
EN ISO 14982:1998-Agricultural and forestry machines-Electromagnetic compatibility-Test methods and acceptance criteria (ISO 14982:1998).
ETSI
EN 300 065-2 V1.1.1 (05-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (Navtex); Part 2: Harmonized EN covering essential requirements of Article 3.2 of the R&TTE Directive.
EN 300 065-3 V1.1.1 (05-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (Navtex); Part 3: Harmonized EN covering essential requirements of Article 3.3 (e) of the R&TTE Directive.
EN 300 086-2 V1.3.1 (03-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment with an internal or external RF connector intended primarily for analog speech; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 113-2 V1.2.1 (04-2002)-Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and speech) and having an antenna connector; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 135-2 V1.1.1 (08-2000)-Electromagnetic compatibility and radio spectrum matters (ERM); Angle-modulated citizens band radio equipment (CEPT PR 27 Radio Equipment); Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 152-2 V1.1.1 (08-2000)-Electromagnetic compatibility and radio spectrum matters (ERM); Maritime emergency position indicating radio beacons (EPIRBs) intended for use on the frequency 121.5 MHz or the frequencies 121.5 MHz and 243 MHz for homing purposes only; Part 2: Harmonized R&TTE Directive.
EN 300 152-3 V1.1.1 (05-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); Maritime emergency position indicating radio beacons (EPIRBs) intended for use on the frequency 121.5 MHz or the frequencies 121.5 MHz and 243 MHz for homing purposes only; Part 3: Harmonized EN under Article 3.3 (e) of the R&TTE Directive.
EN 300 162-2 V1.1.2 (12-2000)-Electromagnetic compatibility and radio spectrum matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 2: Harmonized EN covering essential requirements under Article 3.3 of the R&TTE Directive.
EN 300 162-3 V1.1.1 (05-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 3: Harmonized EN covering essential requirements under Article 3.3 (e) of the R&TTE Directive.
EN 300 219-2 V1.1.1 (03-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment with an internal or external RF connector intended primarily for analog speech; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 220-1 V1.2.1 (11-1997)-Electromagnetic compatibility and radio spectrum matters (ERM); Short-range devices; Technical characteristics and test methods for radio equipment to be used in the 25 to 1000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Parameters intended for regulatory purposes.
EN 300 220-3 V1.1.1 (09-2000)-Electromagnetic compatibility and radio spectrum matters (ERM); Short-range devices (SRD); Radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 224-2 V1.1.1 (01-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); On-site paging service; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.
EN 300 279 V1.2.1 (02-1999)-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for private land mobile radio (PMR) and ancillary equipment (speech and/or nonspeech).
EN 300 296-2 V1.1.1 (03-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment using integral antennas intended primarily for analog speech; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 328-2 V1.2.1 (12-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread-spectrum modulation techniques; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 330-2 V1.1.1 (06-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); Short-range devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.
EN 300 339 V1.1.1 (06-1998)-Electromagnetic compatibility and radio spectrum matters (ERM); General electromagnetic compatibility (EMC) for radio communications equipment.
EN 300 341-2 V1.1.1 (12-2000)-Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service (RP 02); Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.
EN 300 385 V1.2.1 (10-1999)-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for fixed radio links and ancillary equipment.
EN 300 385/A1:1997-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for fixed radio links and ancillary equipment with data rates at around 2 Mbit/sec and above.
EN 300 386 V1.3.2 (05-2003)-Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equip-ment; Electromagnetic compatibility (EMC) requirements.
EN 300 386-2:1997-Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 2: Product family standard.
EN 300 390-2 V1.1.1 (09-2000)-Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 422-2 V1.1.1 (08-2000)-Electromagnetic compatibility and radio spectrum matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.
EN 300 433-2 V1.1.1 (12-2000)-Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Double sideband (DSB) and/or single sideband (SSB) amplitude modulated citizens band radio equipment; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive.
EN 300 440-2 V1.1.1 (09-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.
EN 300 454-2 V1.1.1 (08-2000)-Electromagnetic compatibility and radio spectrum matters (ERM); Wide band audio links; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.
EN 300 827:1998-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for terrestrial trunked radio (TETRA) and ancillary equipment.
EN 300 828:1998-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands.
EN 300 829:1998-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for maritime mobile earth stations (MMES) operating in the 1.5/1.6 GHz bands providing low-bit-rate data communications (LBRDC) for the global maritime distress and safety system (GMDSS).
EN 300 831:1999-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for mobile earth stations (MES) used within satellite personal communications networks (S-PCN) operating in the 1.5/1.6/2.4 GHz and 2 GHz frequency bands.
EN 301 011:1998-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for narrow-band direct-printing (NBDP) Navtex receivers operating in the maritime mobile service.
EN 301 025-2 V1.1.1 (08-2000)-Electromagnetic compatibility and radio spectrum matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class 'D' digital selective calling (DSC); Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.
EN 301 025-3 V1.1.1 (05-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class 'D' digital selective calling (DSC); Part 3: Harmonized EN under Article 3.3 (e) of the R&TTE Directive.
EN 301 090:1998-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for maritime radiotelephone watch receivers operating on 2182 kHz.
EN 301 178-2 V1.1.1 (08-2000)-Electromagnetic compatibility and radio spectrum matters (ERM); Portable very-high frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.
EN 301 357-2 V1.2.1 (06-2001)-Electromagnetic compatibility and radio spectrum matters (ERM); Cordless audio devices in the range 25 MHz to 2000 MHz; Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive.
ETS 300 197/A2:1997-Transmission and multiplexing (TM); Parameters for radio relay systems for the transmission of digital signals and analog video signals operating at 38 GHz.
ETS 300 198/A1:1997-Transmission and multiplexing (TM); Parameters for radio relay systems for the transmission of digital signals and analog video signals operating at 23 GHz.
ETS 300 342-1:1997-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) for European digital cellular telecommunications system (GSM 900 MHz and DCS 1800 MHz); Part 1: Mobile and portable radio and ancillary equipment.
ETS 300 384/A1:1997-Radio broadcasting systems; Very-high frequency (VHF), frequency modulated, sound broadcasting transmitters.
ETS 300 328/A1:1997-Radio equipment and systems (RES); Wideband transmission systems; Technical characteristics and test conditions for data transmission equipment operating in the 2.4 GHz ISM band and using spread-spectrum modulation techniques.
ETS 300 340/A1:1997-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) for European radio message system (ERMES) paging receivers.
ETS 300 341/A1:1997-Radio equipment and systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver.
ETS 300 224 (03-1998)-Electromagnetic compatibility and radio spectrum matters (ERM); On-site paging service; Technical and functional characteristics for on-site paging systems, including test methods.
ETS 300 279/A1:1997-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for private land mobile radio (PMR) and ancillary equipment (speech and/or nonspeech).
ETS 300 296/A1:1997-Radio equipment and systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment using integral antennas intended primarily for analog speech.
ETS 300 329:1997-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) for digital enhanced cordless telecommunications (DECT) equipment.
ETS 300 390/A1:1997-Radio equipment and systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment intended for the transmission of data (and speech) and using an integral antenna.
ETS 300 433/A2:1997-Radio equipment and systems (RES); Double-sideband (DSB) and/or single-sideband (SSB) amplitude modulated citizens band (CB) radio equipment; Technical characteristics and methods of measurement.
ETS 300 445/A1:1997-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for wireless microphones and similar radio-frequency (RF) audio link equipment.
ETS 300 446:1997-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for second-generation cordless telephone (CT2) apparatus operating in the frequency band 864.1 to 868.1 MHz, including public access services.
ETS 300 447:1997-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for VHF FM broadcasting transmitters.
ETS 300 454/A1:1997-Radio equipment and systems (RES); Wideband audio links; Technical characteristics and test methods.
ETS 300 460:1997-Satellite earth stations and systems (SES); Maritime mobile earth stations (MMES) operating in the 1.5/1.6 GHz bands providing low-bit-rate data communications (LBRDCs) for the global maritime distress and safety system (GMDSS); Technical characteristics and methods of measurement.
ETS 300 487/A1:1997-Satellite earth stations and systems (SES); Receive-only mobile earth stations (ROMES) operating in the 1.5 GHz band providing data communications; Radio-frequency (RF) specifications.
ETS 300 673 V1.2.1 (03-2000)-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for 4/6 GHz and 11/12/14 GHz very small aperture terminal (VSAT) equipment and 11/12/13/14 GHz satellite news gathering (SNG) transportable earth station (TES) equipment.
ETS 300 680:1997-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for citizens band (CB) radio and ancillary equipment (speech and/or non-speech); Part 1: Angle modulated; Part 2: Double sideband (DSB) and/or single sideband (SSB).
ETS 300 682:1997-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for on-site paging equipment.
ETS 300 683:1997-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for short-range devices (SRD) operating on frequencies between 9 kHz and 25 GHz.
ETS 300 684:1997-Radio equipment and systems (RES); Electromagnetic compatibility (EMC) standard for commercially available amateur radio equipment.
ETS 300 717:1998-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for analog cellular radio communications equipment; Mobile and portable equipment.
ETS 300 719-1:1997-Radio equipment and systems (RES); Private wide-area paging service; Part 1: Technical characteristics for private wide-area paging system.
ETS 300 741:1998-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for wide-area paging equipment.
ETS 300 826:1997-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for 2.4 GHz wideband transmission systems and high-performance radio local-area network (HIPERLAN) equipment.
ETS 300 830:1998-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) for receive-only mobile earth stations (ROMES) operating in the 1.5 GHz band providing data communications.
Australian Standards
AS/NZS 1044:1995-Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for household and similar purposes, electric tools, and similar electric apparatus; Amendment 2:2000 to AS/NZS 1044:1995.
AS/NZS 1053:1999-Limits and methods of measurement of radio interference characteristics of sound and television receivers and associated equipment.
AS/NZS 2064:1997-Limits and methods of measurement of electromagnetic disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment; Amendment 1:1997 to AS/NZS 2064:1997.
AS/NZS 2557:1999-Limits and methods of measurement of radio interference characteristics of vehicles, motor boats, and spark-ignited engine-driven vehicles.
AS/NZS 3548:1995-Limits and methods of measurement of radio disturbance characteristics of information technology equipment; Amendment 1:1997 to AS/NZS 3548:1995; Amendment 2:1997 to AS/NZS 3548:1995.
AS/NZS 3652:1998-Electromagnetic compatibility-Arc welding equipment.
AS/NZS 4051:1998-Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.
AS/NZS 4251.1:1999-Electromagnetic compatibility (EMC)-Generic emission standard-Residential, commercial, and light industry.
AS/NZS 4251.2: 1999-Electromagnetic compatibility (EMC)-Generic emission standard-Industrial environments.
AS 62040.2-Uninterruptible power systems-Electromagnetic compatibility (EMC) requirements.
Canadian Standards
CAN/CSA C108.1.1:1977 (R1999)-Electromagnetic interference measuring instrument-CISPR type.
CAN/CSA C108.1.2:M1981 (R1999)-Electromagnetic interference measuring instrument-ANSI type.
CAN/CSA C108.1.5-M85 (R1999)-Line impedance stabilization network (LISN).
CAN/CSA C108.3.1-M84 (R2000)-Limits and measurement methods of electromagnetic noise from ac power systems, 0.15-30 MHz.
CAN/CSA-C108.4-M92 (R2003)-Limits and methods of measurement of radio interference characteristics of vehicles, motorboats, and spark-ignited engine-driven devices.
CAN/CSA-C108.6-M91 (R2003)-Limits and methods of measurement of electromagnetic disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment (adopted CISPR 11:1990).
CAN/CSA C108.8-M83 (R2000)-Limits and methods of measurement of electromagnetic emissions from data processing equipment and electronic office machines.
CAN/CSA-C108.9-M91 (R1999)-Sound and television broadcasting receivers and associated equipment-limits and methods of measurement of immunity characteristics.
CAN/CSA-CEI/IEC 1000-1-1-97 (R2001)-Electromagnetic compatibility (EMC)-Part 1: General-Section 1: Application and interpretation of fundamental definitions and terms (adopted CEI/IEC 1000-1-1:1992).
CAN/CSA-CEI/IEC 1000-2-1-97 (R2001)-Electromagnetic compatibility (EMC)-Part 2: Environment-Section 1: Description of the environment-Electromagnetic environment for low frequency conducted disturbances and signalling in public power supply systems (adopted CEI/IEC 1000-2-1:1990).
CAN/CSA CISPR 22-02-Limits and methods of measurement of radio disturbance characteristics of information technology equipment. Adopted CISPR 22:1997, third edition, 1997-11 with Canadian deviations.
CAN/CSA E1000-2-2:1997 (R2001)-Electromagnetic compatibility (EMC)-Part 2: Environment-Section 2: Compatibility levels for low frequency conducted disturbances and signalling in public low-voltage power supply systems (adopted CEI/IEC 1000-2-2:1990).
CAN/CSA-CEI/IEC 61000-4-2-01-Electromagnetic compatibility (EMC)-Part 4-2: Testing and measurement techniques-Electrostatic discharge immunity test (Adopted CEI/IEC 61000-4-2:1995 + A1:1998, edition 1.1, 1999-05).
CAN/CSA-CEI/IEC 61000-4-3-01-Electromagnetic compatibility (EMC)-Part 4-3: Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test (Adopted CEI/IEC 61000-4-3:1995 + A1:1998, Edition 1.1, 1998-11).
CAN/CSA-CEI/IEC 61000-4-4-01-Electromagnetic compatibility (EMC)-Part 4: Testing and measurement techniques-Section 4: Electrical fast transient/burst immunity test-Basic EMC publication (Adopted CEI/IEC 1000-4-4:1995, first edition, 1995-01, including Amendment 1:2000).
CAN/CSA-CEI/IEC 61000-4-5-01-Electromagnetic compatibility (EMC)-Part 4: Testing and measurement techniques-Section 5: Surge immunity test (Adopted CEI/IEC 1000-4-5:1995, first edition, 1995-02, including Corrigendum October 1995 and Amendment 1:2000).
CAN/CSA-CEI/IEC 61000-4-6-01-Electromagnetic compatibility (EMC)-Part 4: Testing and measurement techniques-Section 6: Immunity to conducted disturbances, induced by radio-frequency fields (Adopted CEI/IEC 1000-4-6:1996, first edition, 1996-03, including Corrigendum September 1996 and Amendment 1:2000).
CAN/CSA-CEI/IEC 61000-4-8-02-Electromagnetic compatibility (EMC)-Part 4-8: Testing and measurement techniques-Power frequency magnetic field immunity test (Adopted CEI/IEC 61000-4-8:1993 + A1:2000, edition 1.1, 2001-03).
CAN/CSA-CEI/IEC 61000-4-9-02-Electromagnetic compatibility (EMC)-Part 4-9: Testing and measurement techniques-Pulse magnetic field immunity test (Adopted CEI/IEC 61000-4-9:1993 + A1:2000, edition 1.1, 2001-03).
CAN/CSA-CEI/IEC 61000-4-11-01-Electromagnetic compatibility (EMC)-Part 4: Testing and measuring techniques-Section 11: Voltage dips, short interruptions, and voltage variations immunity tests (Adopted CEI/IEC 1000-4-11:1994, first edition, 1994-06 including Amendment 1:2000).
CAN/CSA-CEI/IEC 61000-4-12-01-Electromagnetic compatibility (EMC)-Part 4: Testing and measurement techniques-Section 12: Oscillatory waves immunity test basic EMC publication (Adopted CEI/IEC 1000-4-12:1995, first edition, 1995-05, including Amendment 1:2000).
CAN/CSA-CEI/IEC 61000-4-16-02-Electromagnetic compatibility (EMC)-Part 4-16: Testing and measurement techniques-Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (Adopted CEI/IEC 61000-4-16:1998, first edition, 1998-01, including Amendment 1:2001).
CAN/CSA-CEI/IEC 61000-4-17-02-Electromagnetic compatibility (EMC)-Part 4-17: Testing and measurement techniques-Ripple on dc input power port immunity test (Adopted CEI/IEC 61000-4-17:1999, first edition, 1999-06, including Amendment 1:2001).
CAN/CSA-CEI/IEC 61000-4-27-01-Electromagnetic compatibility (EMC)-Part 4-27: Testing and measurement techniques-Unbalance, immunity test (Adopted CEI/IEC 61000-4-27:2000, first edition, 2000-08).
CAN/CSA-CEI/IEC 61000-4-28-01-Electromagnetic compatibility (EMC)-Part 4-28: Testing and measurement techniques-Variation of power frequency, immunity test (Adopted CEI/IEC 61000-4-28:1999, first edition, 1999-11).
European Standards
CISPR 11, Edition 4.0-Industrial, scientific, and medical (ISM) radio-frequency equipment electromagnetic disturbance characteristics-Limits and methods of measurement.
CISPR 12:1997-Vehicles, motorboats, and spark-ignited engine-driven devices-Radio disturbance characteristics-Limits and methods of measurement.
CISPR 13, Edition 4.1-Limits and methods of measurement of radio interference characteristics of sound and television broadcast receivers and associated equipment.
CISPR 14-1, Amendment 2, Edition 4.0-EMC-Requirements for household appliances, electric tools, and similar apparatus-Part 1: Emission.
CISPR 15, Consolidated, Edition 6.2-Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.
CISPR 16-1, Consolidated, Edition 2.1-Specification for radio disturbance and immunity measuring apparatus and methods-Part 1: Radio disturbance and immunity measuring apparatus.
CISPR 16-2, Consolidated, Edition 1.2-Specification for radio disturbance and immunity measuring apparatus and methods-Part 2: Methods of measurement of disturbances and immunity; Amendment 1:1999 to CISPR 16-2:1999.
CISPR 16-3, Consolidated, Edition 1.1-Specification for radio disturbance and immunity measuring apparatus and methods-Part 3: Reports and recommendations of CISPR.
CISPR 16-4, Edition 1.0-Specification for radio disturbance and immunity measuring apparatus and methods-Part 4: Uncertainty in EMC measurements.
CISPR 17:1981-Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components.
CISPR 18-3:1986-Code of practice for minimizing the generation of radio noise; Amendment A1:1996 to CISPR 18-3:1986.
CISPR 19:1983-Guidance on the use of substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz.
CISPR 20:1999-Sound and television broadcast receivers and associated equipment immunity characteristics-Limits and methods of measurement.
CISPR 21:1999-Interference to mobile radiocommunications in the presence of impulsive noise-Methods of judging degradation and measures to improve performance.
CISPR 22, Edition 4.0-Information technology equipment-Radio disturbance characteristics-Limits and methods of measurement; Amendment 1:2000 to CISPR 22:1997.
CISPR 23:1987-Determination of limits for industrial, scientific, and medical equipment.
CISPR 24:1997-Information technology equipment -Immunity characteristics-Limits and methods of measurement.
CISPR 25, Edition 2.0-Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used onboard vehicles, boats, and on devices.
CISPR 61000-6-3:1996-Electromagnetic compatibility (EMC)-Part 6: Generic standards-Section 3: Emission standard for residential, commercial, and light-industrial environments.
CISPR/TR 16-3:2000-Specification for radio disturbance and immunity measuring apparatus and methods-Part 3: Reports and recommendations of CISPR.
CISPR/TR 28:1997-Industrial, scientific, and medical equipment (ISM)-Guidelines for emission levels within the bands designated by the ITU.
EN 300 127:1999-Electromagnetic compatibility and radio spectrum matters (ERM); Radiated emission testing of physically large telecommunication systems.
EN 300 386:2000-Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements.
EN 300 386-2:1997-Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 2: Product family standard.
EN 301 489-1:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements.
EN 301 489-2:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 2: Specific conditions for radio paging equipment.
EN 301 489-3:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for short-range devices (SRD) operating on frequencies between 9 kHz and 40 GHz.
EN 301 489-4:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment and services.
EN 301 489-5:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for private land mobile radio (PMR) and ancillary equipment (speech and nonspeech).
EN 301 489-6:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for digital enhanced cordless telecommunications (DECT) equipment.
EN 301 489-7:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS).
EN 301 489-8:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 8: Specific conditions for GSM base stations.
EN 301 489-9:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 9: Specific conditions for wireless microphones and similar radio-frequency (RF) audio link equipment.
EN 301 489-10:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for first- (CT1 and CT1+) and second-generation cordless telephone (CT2) equipment.
EN 301 489-12:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 12: Specific conditions for very small aperture terminal, satellite interactive earth stations operated in the frequency ranges between 4 GHz and 30 GHz in the fixed satellite service (FSS).
EN 301 489-13:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 13: Specific conditions for citizens band (CB) radio and ancillary equipment (speech and nonspeech).
EN 301 489-15:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 15: Specific conditions for commercially available amateur radio equipment.
EN 301 489-16:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 16: Specific conditions for analog cellular radio communications equipment, mobile and portable.
EN 301 489-17:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for wideband data and HIPERLAN equipment.
EN 301 489-18:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 18: Specific conditions for terrestrial trunked radio (TETRA) equipment.
EN 301 489-19:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for receive-only mobile earth stations (ROMES) operating in the 1.5 GHz band providing data communications.
EN 301 489-20:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for mobile earth stations (MES) used in the mobile satellite services (MSS).
EN 301 489-22:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 22: Specific conditions for ground-based VHF aeronautical mobile and fixed radio equipment.
EN 301 843-1 Draft:2003-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for marine radio equipment and services; Part 1: Common technical requirements.
EN 301 843-2 Draft:2003-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific conditions for radiotelephone transmitters and receivers.
EN 301 843-4 Draft:2003-Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for marine radio equipment and services; Part 4: Specific conditions for narrow-band direct-printing (NBDP) NAVTEX receivers.
EN 50147-1:1997-Anechoic chambers-Part 1: Shield attenuation measurement.
EN 50286:2001-Electrical insulating protective clothing for low-voltage installations.
EN 55011:1998-Industrial, scientific, and medical (ISM) radio-frequency equipment-Radio disturbance characteristics-Limits and methods of measurement; Amendment A1:1999 to EN 55011:1998.
EN 55015:2001-Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment; Amendment A1:1997 to EN 55015:1996; Amendment A2:1999 to EN 55015:1996.
EN 55022:1998-Information technology equipment-Radio disturbance characteristics-Limits and methods of measurement; Amendment A1:2000 to EN 55022:1998.
EN 60076-1:1997-Power transformers-Part 1: General; Amendment A11:1997 to EN 60076-1:1997; Amendment A1:2000 to EN 60076-1:1997.
EN 60143-3:1998-Series capacitors for power systems-Part 3: Internal fuses.
EN 60255-22-3:2001-Electrical relays-Part 22-3: Electrical disturbance tests for measuring relays and protection equipment-Radiated electromagnetic field disturbance tests.
EN 60834-1:2000-Teleprotection equipment of power systems-Performance and testing-Part 1: Command systems.
EN 61000-2-9:1996-Electromagnetic compatibility (EMC)-Part 2: Environment-Section 9: Description of HEMP environment-Radiated disturbance.
EN 61000-4-3:2002-Electromagnetic compatibility (EMC)-Part 4-3: Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test; Amendment A1:1998 to EN 61000-4-3:1996.
EN 61000-4-6:1996-Electromagnetic compatibility (EMC)-Part 4-6: Testing and measurement techniques-Immunity to conducted disturbances induced by radio-frequency fields.
EN 61000-4-7:2002-Electromagnetic compatibility (EMC)-Part 4-7: Testing and measurement techniques-General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto.
EN 61000-4-8:1994-Electromagnetic compatibility (EMC)-Part 4-8: Testing and measurement techniques-Power frequency magnetic field immunity test.
EN 61000-4-9:1994-Electromagnetic compatibility (EMC)-Part 4-9: Testing and measurement techniques-Pulse magnetic field immunity test.
EN 61000-4-23:2001-Electromagnetic compatibility (EMC)-Part 4-23: Testing and measurement techniques-Test methods for protective devices for HEMP and other radiated disturbances.
EN 61000-4-28:2000-Electromagnetic compatibility (EMC)-Part 4-28: Testing and measurement techniques-Variation of power frequency, immunity test.
EN 61248-3:1997-Transformers and inductors for use in electronic and telecommunication equipment-Part 3: Sectional specification for power transformers on the basis of the capability approval procedure.
EN 61248-4:1997-Transformers and inductors for use in electronic and telecommunication equipment-Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure.
EN 62053-31:1999-Electricity metering equipment (ac)-Particular requirements-Part 31: Pulse output devices for electromechanical and electronic meters (two wires only).
ENV 50091-3:1998-Uninterruptible Power Systems (UPS)-Part 3: General requirements and test methods.
ES 201 468:2002-Electromagnetic compatibility and radio spectrum matters (ERM); Additional electromagnetic compatibility (EMC) requirements for telecommunications equipment for enhanced availability of service in specific applications.
ETS 300 127:1994-Equipment engineering (EE); Radiated emission testing of physically large telecommunication systems.
ETS 300 162:1998-Electromagnetic compatibility and radio spectrum matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement.
ETS 300 386-1:1994-Equipment engineering (EE); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 1: Product family overview, compliance criteria, and test levels.
IEC 61000-1-2:2001-Electromagnetic compatibility (EMC)-Part 1-2: General-Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena.
IEC 61000-3-2:2001-Electromagnetic compatibility (EMC)-Part 3: Limits. Section 2: Limits for harmonic current emissions for electronic equipment (equipment input current less than 16 A per phase).
IEC 61000-3-3:2002-Electromagnetic compatibility (EMC)-Part 3-3: Limits-Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current less than or equal to 16 A.
IEC 61000-3-11:2001-Electromagnetic compatibility (EMC)-Part 3-11: Limits-Limitation of voltage changes, voltage fluctuations, and flicker in public low-voltage supply systems-Equipment with rated voltage current less than or equal to 75 A and subject to conditional connection.
R014-001:1999-Guide for the evaluation of electromagnetic fields around power transformers.
TR 101 651:1999-Electromagnetic compatibility and radio spectrum matters (ERM); Classification of the electromagnetic environment conditions for equipment in telecommunication networks.
Other Standards
AE4L-81-2:1989-Test waveforms and techniques for assessing the effects of lightning-induced transients.
AIR 1147A:1970-Electromagnetic interference on aircraft from jet engine charging.
AIR 1209:1998-Construction and calibration of parallel plate transmission line for electromagnetic interference susceptibility testing.
AIR 1221:1971-Electromagnetic compatibility (EMC) system design checklist.
AIR 1255:1971-Spectrum analyzers for electromagnetic interference measurements.
AIR 1394:1998-Cabling guidelines for electromagnetic compatibility.
AIR 1404:1976-Dc resistivity versus RF impedance of EMI gaskets.
AIR 1423:1977-Electromagnetic compatibility on gas turbine engines for aircraft propulsion.
AIR 1425:1998-Methods of achieving electromagnetic compatibility of gas turbine engine accessories, for self-propelled vehicles.
AIR 1700:1998-Upper frequency measurement boundary for evaluation of shielding effectiveness in cylindrical systems.
ANSI C37.32:2002-American national standard for switchgear-High-voltage air switches, bus supports, and switch accessories-Schedules of preferred ratings, manufacturing specifications, and application guide.
ANSI C37.42:1996-American national standard for switchgear-Distribution cutouts and fuse links-Specifications.
ANSI C37.44:1981 (R1992)-American national standard specifications for distribution oil cutouts and fuse links.
ANSI C37.45:1981 (R1992)-American national standard specifications for distribution enclosed single-pole air switches.
ANSI C37.50:1989-American national standard for switchgear-Low-voltage ac power circuit breakers used in enclosures-Test procedures.
ANSI C37.51:1989-American national standard for switchgear-Metal-enclosed low-voltage ac power circuit-breaker switchgear assemblies-Conformance test procedures.
ANSI C37.52:2000-American national standard test procedures for low-voltage ac power circuit protectors used in enclosures.
ANSI C37.54:2002-American national standard for switchgear-Indoor alternating-current high-voltage circuit breakers applied as removable elements in metal-enclosed switchgear assemblies-Conformance test procedures.
ANSI C37.55:2002-American national standard for switchgear-Metal-clad switchgear assemblies-Conformance test procedures.
ANSI C37.57:1990-American national standard for switchgear-Metal-enclosed interrupter switchgear assemblies-Conformance testing.
ANSI C37.58:1990-American national standard for switchgear-Indoor ac medium-voltage switches for use in metal-enclosed switchgear-Conformance test procedures.
ANSI C37.66:1969 (R1997)-American national standard for requirements for oil-filled capacitor switches for alternating-current systems.
ANSI C37.85:2002-American national standard for switchgear-Alternating-current high-voltage power vacuum interrupters-Safety requirements for x-radiation limits.
AS 8023:1985-Airborne static electric power inverters.
AS 13441:1998-Test methods for electrical connectors.
AS 25064:1999-Conduit, flexible, radio-frequency shielding.
ASTM B904:2000-Standard specification for autocatalytic nickel over autocatalytic copper for electromagnetic interference shielding.
ASTM E1004:2002-Electrical conductivity, using the electromagnetic (eddy current) method, determining.
IEEE 32:1972 (R1997)-IEEE standard requirements, terminology, and test procedures for neutral grounding devices.
IEEE 81:1983-Guide for measuring earth resistivity, ground impedance, and earth surface potentials of a ground system.
IEEE 139:1988 (R1999)-IEEE recommended practice for the measurement of radio-frequency emission from industrial, scientific, and medical (ISM) equipment installed on user's premises.
IEEE 140:1990 (R1995)-IEEE recommended practice for minimization of interference from radio-frequency heating equipment.
IEEE 213:1987 (R1998)-IEEE standard procedure for measuring conducted emissions in the range of 300 kHz to 25 MHz from television and FM broadcast receivers to power lines.
IEEE 291:1991-IEEE standard methods for measuring electromagnetic field strength of sinusoidal continuous waves, 30 Hz to 30 GHz.
IEEE 299:1997-IEEE standard for measuring the effectiveness of the electromagnetic shielding enclosure.
IEEE 376:1974 (R1998)-IEEE standard for the measurement of impulse strength and impulse bandwidth.
IEEE 469:1988 (R1994)-IEEE recommended practice for voice-frequency electrical-noise tests of distribution transformers.
IEEE 473:1985 (R1997)-IEEE recommended practice for an electromagnetic site survey (10 kHz to 10 GHz).
IEEE 475:2000-IEEE standard measurement procedure for field-disturbance sensors, 300 MHz to 40 GHz.
IEEE 518:1982 (R1996)-IEEE guide for the installation of electrical equipment to minimize noise inputs to controllers from external sources.
IEEE 539:1990-IEEE standard definitions of terms relating to corona and field effects of overhead power lines.
IEEE 644:1994 (R2001)-IEEE standard procedure for measurement of power frequency electric and magnetic fields from ac power lines.
IEEE 776:1992 (R1998)-IEEE recommended practice for inductive coordination of electric supply and communication lines.
IEEE 824:1994-IEEE standard for series capacitors in power systems.
IEEE 935:1989 (R2001)-IEEE guide on terminology for tools and equipment to be used in live-line working (IEC 743:1983).
IEEE 1036:1992-IEEE guide for application of shunt power capacitors.
IEEE 1048:1990-IEEE guide for protective grounding of power lines.
IEEE 1128:1998-IEEE recommended practice for radio-frequency (RF) absorber evaluation in the range of 30 MHz to 5 GHz.
IEEE 1140:1994 (R1999)-IEEE standard test procedures for the measurement of electric and magnetic fields from video display terminals (VDTs) from 5 Hz to 400 kHz.
IEEE 1247:1998-IEEE standard for interrupter switches for ac, rated above 1000 V.
IEEE 1302:1998-IEEE guide for the electromagnetic characterization of conductive gaskets in the frequency range of dc to 18 GHz (references IEEE 100:1996 and 299:1997).
IEEE 1309:1996-IEEE standard for calibration of electromagnetic field sensors and probes excluding antennas from 9 kHz to 40 GHz.
IEEE 1460:1996-IEEE guide for the measurement of quasi-static magnetic and electric fields.
IEEE C37.04:1999-IEEE standard rating structure for ac high-voltage circuit breakers.
IEEE C37.09:1999-IEEE standard test procedure for ac high-voltage circuit breakers rated on a symmetrical current basis.
IEEE C37.010:1999-IEEE application guide for ac high-voltage circuit breakers rated on a symmetrical current basis.
IEEE C37.012:1979 (R2000)-IEEE application guide for capacitance current switching for ac high-voltage circuit breakers rated on a symmetrical current basis.
IEEE C37.083:1999-IEEE guide to synthetic capacitive current-switching test of ac high-voltage circuit breakers.
IEEE C37.14:2002-IEEE standard for low-voltage dc power circuit breakers used in enclosures.
IEEE C37.24:1986 (R1998)-IEEE guide for evaluating the effect of solar radiation on outdoor metal-enclosed switchgear.
IEEE C37.26:1972 (R1996)-IEEE standard guide for methods of power-factor measurement for low-voltage inductive test circuits.
IEEE C37.27:1987 (R1998)-IEEE standard application guide for low-voltage ac nonintegrally fused power circuit breakers (using separately mounted current-limiting fuses).
IEEE C37.29:1981 (R1990)-IEEE standard for low-voltage ac power circuit protectors used in enclosures.
IEEE C37.30:1997-IEEE standard requirements for high-voltage switches.
IEEE C37.34:1994-IEEE standard test code for high-voltage air switches.
IEEE C37.35:1995-IEEE guide for the application, installation, operation, and maintenance of high-voltage air disconnecting and load interrupter switches.
IEEE C37.36B:1990-IEEE guide to current interruption with horn-gap air switches.
IEEE C37.37:1996-IEEE standard for loading guide for ac high-voltage air switches (in excess of 1000 V).
IEEE C37.38:1989-IEEE standard for gas-insulated, metal-enclosed disconnecting, interrupter, and grounding switches.
IEEE C37.40:1993-IEEE standard service conditions and definitions for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories.
IEEE C37.40B:1996-IEEE standard service conditions and definitions for external fuses for shunt capacitors.
IEEE C37.41:2000-IEEE standard design tests for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories.
IEEE C37.41E:1996-IEEE standard design tests for external fuses and shunt capacitors.
IEEE C37.48:1997-IEEE guide for application, operation, and maintenance of high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories.
IEEE C37.59:2002-IEEE standard requirements for conversion of power switchgear equipment.
IEEE C37.60:1981 (R1992)-IEEE standard requirements for overhead, pad-mounted, dry-vault, and submersible automatic circuit reclosers and fault interrupters for ac systems.
IEEE C37.61:1973 (R1992)-IEEE standard guide for the application, operation, and maintenance of automatic circuit reclosers.
IEEE C37.63:1997-IEEE standard requirements for overhead, pad-mounted, dry-vault, and submersible automatic line sectionalizers of ac systems (references: IEEE 4:1995, 386:1995, C37.09:1979 [R1988], C37.24:1986 [R1991], C37.100:1992).
IEEE C37.71:2001-IEEE standard for three-phase, manually operated subsurface load interrupting switches for alternating current systems.
IEEE C37.81:1989 (R1999)-IEEE guide for seismic qualification of Class 1E metal-enclosed power switchgear assemblies.
IEEE C37.90.2:1995 (R2001)-IEEE standard withstand capability of relay systems to radiated electromagnetic interference from transceivers.
IEEE C37.99:2000-IEEE guide for the protection of shunt capacitor banks.
IEEE C37.100:1992-IEEE standard definitions for power switchgear.
IEEE C63.011:2000-Limits and methods of measurement of radio disturbance characteristics of industrial, scientific, and medical (ISM) radio-frequency equipment.
IEEE C63.022:1996-Limits and methods of measurement of radio disturbance characteristics of information technology equipment.
IEEE C63.2:1996-Electromagnetic noise and field strength instrumentation, 10 kHz to 40 GHz specifications.
IEEE C63.4:2000-Methods of measurement of radio-noise emissions from low-voltage electrical and electronic equipment in the range of 9 kHz to 40 GHz.
IEEE C63.5:1998-Electromagnetic compatibility-Radiated emission measurements in electromagnetic interference (EMI) control-Calibration of antennas.
IEEE C63.6:1996-Guide for the computation of errors in open-area test site measurements.
IEEE C63.7:1992-Construction of open-area test sites for performing radiated emission measurements.
IEEE C63.12:1999-Recommended practice for electromagnetic compatibility limits.
IEEE C63.13:1991-Guide on the application and evaluation of EMI power-line filters for commercial use.
IEEE C63.14:1998-Dictionary for technologies of electromagnetic compatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD).
IEEE C63.17:1998-Methods of measurement of the electromagnetic and operational compatibility of unlicensed personal communications services (UPCS) devices.
IEEE C63.18:1997-Recommended practice for an on-site ad hoc test method for estimating radiated electromagnetic immunity of medical devices to specific radio-frequency transmitters.
IEEE C95:2002-IEEE standard for radio-frequency energy and current flow symbols.
ISO 2315:1994-Two- and four-pole sealed electromagnetic relays, 2 A and 3 A-Clearance and fixing dimensions.
ISO 5066-1:1986-Hermetically sealed monostable electrical relays, 2 A and 3 A-Part 1: Operating characteristics and test conditions.
ISO 5066-2:1986-Hermetically sealed monostable electrical relays, 2 A and 3 A-Part 2: Type approval tests.
ISO 7637-1:2002-Road vehicles-Electrical disturbance by conduction and coupling-Part 1: Passenger cars and light commercial vehicles with nominal 12-V supply voltage-Electrical transient conduction along supply lines only.
ISO 7637-2:1990-Road vehicles-Electrical disturbance by conduction and coupling-Part 2: Commercial vehicles with nominal 24-V supply voltage-Electrical transient conduction along supply lines only.
ISO 7637-3:1995-Road vehicles-Electrical disturbance by conduction and coupling-Part 3: Vehicles with nominal 12-V or 24-V supply voltage-Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines.
ISO 11451-1:2001-Road vehicles-Electrical disturbances by narrow-band radiated electromagnetic energy-Vehicle test methods-Part 1: General and definitions.
ISO 11451-2:2001-Road vehicles-Electrical disturbances by narrow-band radiated electromagnetic energy-Vehicle test methods-Part 2: Off-vehicle radiation source.
ISO 11451-3:1994-Road vehicles-Electrical disturbances by narrow-band radiated electromagnetic energy-Vehicle test methods-Part 3: On-board transmitter simulation.
ISO 11451-4:1995-Road vehicles-Electrical disturbances by narrow-band radiated electromagnetic energy-Vehicle test methods-Part 4: Bulk current injector (BCI).
ISO 11452-1:2001-Road vehicles-Electrical disturbances by narrow-band radiated electromagnetic energy-Component test methods-Part 1: General and definitions.
ISO 11452-2:1995-Road vehicles-Electrical disturbances by narrow-band radiated electromagnetic energy-Component test methods-Part 2: Absorber-lined chamber.
ISO 11452-3:2001-Road vehicles-Electrical disturbances by narrow-band radiated electromagnetic energy-Component test methods-Part 3: Transverse electromagnetic mode (TEM) cell.
ISO 11452-4:2001-Road vehicles-Electrical disturbances by narrow-band radiated electromagnetic energy-Component test methods-Part 4: Bulk current injection (BCI).
ISO 11452-5:2002-Road vehicles-Electrical disturbances by narrow-band radiated electromagnetic energy-Component test methods-Part 5: Strip line.
ISO 11452-6:1997 (R1999)-Road vehicles-Electrical disturbances by narrow-band radiated electromagnetic energy-Component test methods-Part 6: Parallel plate antenna.
ISO 11452-7:1995-Road vehicles-Electrical disturbances by narrow-band radiated electromagnetic energy-Component test methods-Part 7: Direct radio-frequency (RF) power injection.
ISO 13766:1999-Earth-moving machinery-Electromagnetic compatibility.
ISO 14982:1998-Agricultural and forestry machinery-Electromagnetic compatibility-Test methods and acceptance criteria.
ISO TR 10605:1994-Road vehicles-Electrical disturbances from electrostatic discharges.
ISO TR 11062:1994-Manipulating industrial robots-EMC test methods and performance evaluation criteria-Guidelines.
MIL-A-17161D:1985-Absorber, radio-frequency radiation (microwave-absorbing material), general specification for.
MIL-B-5087-Bonding, electrical, and lightning protection for aerospace systems.
MIL-E-6051E-Electromagnetic compatibility requirements, systems (aircraft and associated weapons systems).
MIL-HDBK-1512:1997-Electroexplosive subsystems, electrically initiated, design requirements, and test methods.
MIL-HDBK-1857:1998-Grounding, bonding, and shielding design practices.
MIL-HDBK-235/1B:2000-Electromagnetic (radiated) environment considerations for design and procurement of electrical and electronic equipment, subsystems, and systems.
MIL-HDBK-237B:1997-Electromagnetic environmental effects on platforms, systems, and equipment.
MIL-HDBK-241B-Design guide for EMI reduction in power supplies.
MIL-HDBK-274(1):1990-Electrical grounding for aircraft safety.
MIL-HDBK-293:1987-Electronic counter-countermeasures considerations in radar systems acquisition.
MIL-HDBK-294:1986-Electronic counter-countermeasures considerations in naval communication systems.
MIL-HDBK-335:1981 (R1992)-Management and design guidance, electromagnetic radiation hardness for air-launched ordnance systems.
MIL-HDBK-419A-Grounding, bonding, and shielding for electronic equipment and facilities.
MIL-HDBK-1857-Grounding, bonding, and shielding design practices.
MIL-STD-220B:2000-Method of insertion-loss measurement.
MIL-STD-285-Method of attenuation measure for enclosures; EM shielding for electronic test purposes.
MIL-STD-449D(1):1976-Measurement of radio-frequency spectrum characteristics.
MIL-STD-461E:1999-Requirements for the control of electromagnetic interference, characteristics of subsystems and equipment.
MIL-STD-463A-Definitions and systems of units, electromagnetic interference and electromagnetic compatibility.
MIL-STD-464A:2002-Electromagnetic environmental effects requirements for systems.
MIL-STD-469B:1996-Radar engineering interface requirements, electromagnetic compatibility metric.
MIL-STD-499D-Measurement of radio frequency spectrum characteristics.
MIL-STD-1310G:1996-Shipboard bonding, grounding, and other techniques for electromagnetic compatibility and safety.
MIL-STD-1377:1971-Effectiveness of cable, connector, and weapon enclosure shielding and filters in precluding hazards of electromagnetic radiation to ordnance, measurement of.
MIL-STD-1385B-General requirements for preclusion of ordnance hazards in EM fields.
MIL-STD-1512-Electroexplosive subsystems, electrically initiated, design requirements and test methods.
MIL-STD-1541A:1987-Electromagnetic compatibility requirements for space systems.
MIL-STD-1542A-EMC grounding requirements for space systems.
MIL-STD-1542B:1991-Electromagnetic compatibility and grounding requirements for space system facilities.
MIL-STD-1605:1973-Procedures for conducting a shipboard electromagnetic interference (EMI) survey (surface ships).
MIL-STD-1757A-Lightning protection of aerospace vehicles and hardware.
MIL-STD-1818A-Electromagnetic effects requirements for systems.
MIL-STD-1857-Grounding, bonding, and shielding design practices.
SAE ARP 936A:2003-Capacitor, 10 µF for EMI measurements.
SAE ARP 958D:2003-Electromagnetic interference measurement antennas-Standard calibration method.
SAE ARP 1172:1972 (R1991)-Filters, conventional, electromagnetic interference reduction, general specification.
SAE ARP 1173:1994-Test procedure to measure the RF shielding characteristics of EMI gaskets.
SAE ARP 1267:1973 (R1991)-Electromagnetic interference measurement impulse generators-Standard calibration requirements and techniques.
SAE ARP 1481A:1998-Corrosion control and electrical conductivity in enclosure design.
SAE ARP 1705:1981 (R1991)-Coaxial test procedure to measure the RF shielding characteristics of EMI gasket materials.
SAE ARP 1870:1987 (R1999)-Aerospace systems electrical bonding and grounding for electromagnetic compatibility and safety.
SAE ARP 1972:1994-Measurement practices and procedures recommended for EMC testing.
SAE ARP 4242:1999-Electromagnetic compatibility control requirements systems.
SAE ARP 4244:1998-Recommended insertion-loss test methods for EMI power-line filters.
SAE ARP 5412:1999-Aircraft lightning environment and related test waveforms.
SAE ARP 5413:1999-Certification of aircraft electrical/electronic systems for the indirect effects of lightning.

To Order IEEE Standards, go the the IEEE Website:
http://standards.ieee.org/catalog/olis/emc.html
For ordering all other Standards, we recommend the ILI Site:
http://www.ili.co.uk/cgi-bin/main_frames?DATA=43BC1089: